|
|
注意:本帖含有图片和附件资料 登录 才可查看，没有帐号？
您需要 登录 才可以下载或查看，没有账号？立即注册
×
爱普生EB-770Fi,770F,760Wi,760W,775F,780Fi扫描仪英文维修手册
4.8.2 Obtaining and Saving Adjustment Data Adjustment data can be obtained by the following procedure.
1 Obtain SERVICE_TOOL_MANUAL_E_**.pdf by Tech Exchange, and obtain the adjustment data by referring to this document Data can be backed up from the projector main body before replacing parts and handled as adjustment data only when the MA Board is replaced. It is recommended to obtain the adjustment data by the following procedure when a backup is possible while the product to be repaired can be turned on.
Finish all procedures up to CAT2 Connection Test and click BACKUP-OK in the CAT2 main window Check the adjustment data file saved to the following directory
2 Save the adjustment data file to the following folder in the PC
3 Check the serial No. of the file name, and make sure that the correct adjustment data has been obtained
|
|
发表于 2023-4-10 17:49:06