hp m283 bios firmware for motherboard replacement

Archives · 发表于 2024-2-23 05:53:41

注意:本帖含有图片和附件资料登录才可查看，没有帐号？

您需要登录才可以下载或查看，没有账号？立即注册

×

Hi,

could someone see if they have a bios firmware flash file or see if they can search Wise and see if its something listed.

Also i do have m283 Engine_FW.exe firmware file and DCC version .prn file but as that does not work.

on the board there are 2 holes that look to be where a jumper is suppose to be - as it has the word FW Update around it - so i have used some thermal fuse wire to jump it
nothing happened.

as i have it for the m277dn/n and m252

nebula_B3Q10_boid_DW.rfu <<< for the m277dw } >>>>> for the m252dw orion_B4A22_boid_DW.rfu
with the cmd reflash.

as i have 2 fdw machines that are boot but no display or connecting to the pc via usb.

i have tried the fdn board in both fdw's Machines and yes it boots fine.
i did this to rule out the other parts/lcd are working or not.
so psu & Dc controller + LCD are working .

from some online sites it appears to be an odd issue. also seams to happen to the m428fdw and m428 series too.

i have replaced the formatter previously in an a m428 and reprogrammed the Serial Number to it.

that's still working to this day. - on older firmware as hp does there tricks with non-hp toners.

if anyone knows anything about this issue or have a fix please let me know or pm me if needed.

thanks all .
Wav

Archives · 发表于 2024-2-23 06:27:05

please see the file is like : https://www.16qiang.com/forum.php?mod=viewthread&tid=13824&extra=page%3D1

view520 · 发表于 2024-2-23 11:04:35

看不懂

Archives · 发表于 2024-3-31 23:29:42

你好，

有人可以看看他们是否有 BIOS 固件闪存文件，或者看看他们是否可以搜索 Wise 并查看是否列出了某些内容。

我也有 m283 Engine_FW.exe 固件文件和 DCC 版本 .prn 文件，但因为那不起作用。

板上有 2 个孔，看起来像是跳线所在的位置 - 因为它周围有“FW Update”字样 - 所以我使用了一些热熔丝来跳线
什么都没发生。

因为我有 m277dn/n 和 m252

nebula_B3Q10_boid_DW.rfu <<< 对于 m277dw } >>>>> 对于 m252dw orion_B4A22_boid_DW.rfu
用cmd刷新。

因为我有 2 台 fdw 机器正在启动，但没有显示或通过 USB 连接到电脑。

我已经在两台 fdw 机器上尝试过 fdn 板，是的，它启动得很好。
我这样做是为了排除其他部件/液晶屏是否工作。
所以 psu 和 DC 控制器 + LCD 正在工作。

从一些在线网站来看，这似乎是一个奇怪的问题。 m428fdw 和 m428 系列也可能出现这种情况。

我已经更换了 m428 中之前的格式化程序，并将序列号重新编程到它。

直到今天这仍然有效。 - 在较旧的固件上，惠普对非惠普碳粉有一些技巧。

如果有人知道有关此问题的任何信息或有解决方案，请告诉我或在需要时pm我。

谢谢大家。
波形

账号		自动登录	找回密码
密码			立即注册

[惠普/三星] hp m283 bios firmware for motherboard replacement

注意:本帖含有图片和附件资料登录才可查看，没有帐号？

浏览过的版块

[惠普/三星] hp m283 bios firmware for motherboard replacement

注意:本帖含有图片和附件资料 登录 才可查看，没有帐号？

浏览过的版块

注意:本帖含有图片和附件资料登录才可查看，没有帐号？